 |
|
 |
| dBa Panels |
Description |
View Product Page |
Advantage: Decorative aesthetic, cost effective relative to standard diffusers, Very easy installation.
Description: These panels are a version of our Sound Silencer panels. We send them off to a company that uses a tool to remove some of the beads and offer a surface that will not only absorb reverberation but will offer a surface to help diffuse sound within the room. The panels can be adhered directly to the structure or dropped into a standard T-bar grid.
|
| Diffuser Panels |
Description |
View Product Page |
Advantage: Very good at tuning a room, Easy installation, can be wrapped with fabric.
Description: These are used generally in listening environments where sound quality is critical. They are basically forms of fiberglass or resin hardened plastic in either pyramid or barrel shapes. They are usually found installed onto walls or dropped into standard ceiling grid.
|
| V-max vibration damping sheets |
Description |
View Product Page |
Advantage: Very light weight, Very efficient vibraton damper, PSA backing
Description: This product is used to absorb vibration in sheet metal and is extremely efficient at doing it's job. Although most of the uses for this product are in the automobile industry, many people have used it to eliminate the resonance of HVAC ducts and sheet metal enclosures.
|
| Pipe and Duct Lag |
Description |
View Product Page |
Advantage: Very Easy to install, Class A rated when foil backed, Offers high STC values
Description: This product is used exclusively to wrap HVAC ducts. The fiberglass acts as a sound absorber as well as a decoupler for the mass loaded vinyl which is the product doing the "sound blocking." It is a very heavy product (1.25lbs per square foot) and one should be sure to consider the added weight to the HVAC system before installing. We adhere a reinforced, silver Mylar to the finish side of the vinyl which offers a class A rated finish surface. |
| Super W Pads |
Description |
View Product Page |
Advantage: Economical, Thin profile, Exterior rated, Easy to use, Reduces vibration, Very simple.
Description: This is a rubber "toaster waffle" that is designed to reduce vibration from transferring to the surface below a machine.
|
| Neoprene Mounts |
Description |
View Product Page |
Advantage: Economical, Thin profile, Exterior rated, Easy to use, Reduces vibration, Multiple different rubber densities for matching machine corner weight.
Description: This is a rubber foot that is designed to reduce vibration from transferring to the surface below a machine. These mounts can be bolted to the machine as well as to the floor. Different rubber durometers allow for supporting the varying weight of different machines.
|
| IMF - Un-housed spring mounts |
Description |
View Product Page |
Advantage: Much better vibration reduction than neoprene mounts, Economical.
Description: These simple spring isolators do a FAR better job than any kind of rubber isolator as long as the weight of the machine is appropriate for the spring used. The load range is 12lbs - 625lbs.
|
| SLF & SLFH - Un-housed spring mounts |
Description |
 
View Product Page |
Advantage: Much better vibration reduction than neoprene mounts, Economical, allows for securing to machine or floor
Description: These simple spring isolators do a FAR better job than any kind of rubber isolator as long as the weight of the machine is appropriate for the spring used. The load range is 12lbs - 625lbs. Although a machine could still "walk" off of them, they are more stable than the IMF simple spring mounts above.
|
| Housed spring mounts |
Description |
View Product Page |
Advantage: Housing eliminates the chance for machine "walk", Exterior rated, internal adjustment optional
Description: These mounts are used when a machine might walk off of it's base or on a rooftop where wind load becomes a factor. Many variations of the housed mounts are available and are almost always needed for roof top HVAC equipment.
|
| Neoprene Hangers |
Description |
View Product Page |
Advantage: Economical, Load ranges 60-880lbs, Very easy to install
Description: These hangers are simply used to interrupt the hard surface contact that a machine would normally have when it is hung from a supporting structure. It is ideal to try to match the corner weight of the machine to the hanger above it so that the rubber deflects (compresses) properly.
|
| Spring Hangers |
Description |
View Product Page |
Advantage: Much better vibration isolation than neoprene or fiberglass hangers.
Description: There are hundreds of spring isolators that have different advantages and disadvantages. There are simple hangers like the one pictured to the left, housed hangers, neoprene and spring hangers, etc. Which hanger used is generally dictated by what is hanging from it. The load range is 12lbs - 625lbs.
|
| Quiet Liner |
Description |
View Product Page |
Advantage: Economical, Very good absorption, typically used in HVAC ducts.
Description: This is a variation of our Echo Eliminator recycled cotton product but is manufactured with industrial uses in mind. We produce 48" wide rolls of varying length. A thin, black, nylon "anti microbial" fabric is laminated to one side of the roll to keep cotton fibers from becoming airborne when it is installed into HVAC duct work. Since it is an industrial grade product, aesthetics is not a concern during manufacturing but it has been used as a finish surface in some rooms or behind stretch wall systems.
|
| Quiet Wrap |
Description |
View Product Page |
Advantage: Economical, typically used for thermal reasons to wrap HVAC ducts.
Description: This is also a variation of our Echo Eliminator cotton line. This ¼" thick cotton roll is used mostly for thermal reasons but will offer some attenuation and a bit of sound blocking. A thin, reinforced Mylar is laminated to one side for thermal reasons.
|
| Sound Level Meters |
Description |
View Product Page |
Advantage: Allows for accurate data gathering, easy to use, interfaces with a computer
Description: This hand-held sound pressure meter is often times a VERY useful tool to help determine which kind of treatment is appropriate for a room. It measures the sound energy in a room and displays the data in a means that one can interpret and use. These tools are available for rental.
|
| Talk Light |
Description |
View Product Page |
Advantage: Helps monitor sound pressure levels in schools
Description: These lights are either small, desktop units or large traffic lights that are mounted to walls or placed on stands. They have an internal sound pressure meter which send a signal to one of three lights. Settings can be adjusted to allow for louder or quieter spaces and as the sound pressure increases, the lights change from yellow to red. A buzzer is also available which will alert students when the room gets too loud.
|
| Acoustic Enclosures |
Description |
View Product Page |
Advantage: Free standing rooms prefabricated to eliminate sound travel.
Description: Although these enclosures are not cheap, they are extremely well built and can be built to suit. Most often times they are found in manufacturing locations as a soundproof room within a larger room. Considerations for electrical, lighting, HVAC and sprinklers can be included during manufacturing.
|
| White Noise Machines |
Description |
View Product Page |
Advantage: Very easy to install (plug and play), helps mask conversations.
Description: This machine is intended to be used near a listener to help them from being able to understand conversations that are taking place in another space. Doctors offices, psychologists offices, schools and hospitals often times use them in waiting areas so conversations are kept confidential. The person's ears and mind, near the machine will concentrate on the constant "whurr" or "hum" that is being made by the machine rather than the conversation noises in a nearby space. It is a comfortable way to make a room louder so one can not "hear a pin drop."
|
| Stud Gasket Tape |
Description |
View Product Page |
Advantage: Economical, PSA Backed for quick attachment.
Description: This tape is a rubber based, 5/16" thick roll of cellular rubber that helps limit hard surface contact that a layer of drywall has with the stud that supports it. It will also help reduce the resonance of the sheetrock as it decouples the wall assembly.
|
| Sound FighterT Outdoor Barrier Wall System |
Description |
View Product Page |
Advantage: Very High Performance, Exterior Rated, Nominal parts, Used for large projects
Description: This product is one of the highest performing exterior sound walls available. The "blocks" are made to different specifications based on the acoustical needs of the wall. The installer lags hot dipped I beams into a footer based on our technical drawings and simply slips each block down the I beam until the needed height is reached. A top cap is then installed and the installation is done. This product is usually used for large scale projects funded by states municipalities or large companies.
|
| Exterior Sound Blanket Reinforced |
Description |
View Product Page |
Advantage: Lowest cost for highest performance exterior product, All panels made to suit, nominal type installation, Exterior Rated, Very easy to install
Description: These blankets are made similar to our interior curtains but are intended for exterior use. We use a UV stable vinyl facing, thread and Velcro. Grommets are installed across the top, middle and bottom of each panel as points of attachment. The panels easily screw or zip-tie to multiple kinds of structures like a chain link or privacy fence. Each job is made to order so we have full control over dimensions and specifications.
|
| Exterior Quilted Absorber |
Description |
View Product Page |
Advantage: Economical, Very good absorption, Very easy to install, Custom sized per job.
Description: These panels are typically used on concrete or masonry walls that enclose equipment. They are only intended to absorb echo that would typically reflect off of the hard surfaces around a machine. They are made similar to the exterior sound blankets above but are usually butted up next to each other rather than attached to one another via vertical Velcro seams.
|
| Reinforced Mass Loaded Vinyl |
Description |
View Product Page |
Advantage: Economical, very easy to install, Provides STC only
Description: This is a reinforced version of our Mass Loaded Vinyl noise barrier. It has a thin nylon scrim on the inside of the panel which helps it's resistance to wind loads by preventing it from tearing. This product is only used when blocking sound is the consideration and is available with grommets where needed and vertical Velcro seams to make one consistent sound wall.
|
| Sound Silencer |
Description |
View Product Page |
Advantage: Economical, In stock, 2x4 panel sizes, Very easy to install
Description: The Sound Silencer panels can be used in exterior situations but need to be used carefully. It is only recommended to use the charcoal color in areas where direct ultra violet (sunlight) contact is not an issue as the polypropylene will start to break down after 6-8 months of extended exposure. They will need to be glued or screwed to some kind of fence- preferably a solid wooden enclosure. A privacy fence with "slats" will allow for a considerable amount of sound to leak out of the enclosure.
|
|
|
|
